中文
ZDM-800RS Universal Rolling Brush Grinding Machine

Rolling-brush grinding material conducts 360° grinding without dead angle for the contour of workpiece through rotation and revolution so that the burr and sharp edge may be processed evenly and contour edge is smooth, beautiful and consistent.

Free regulation of grinding and travel parameters may achieve that only the contour and sharp edge of workpiece are grinded without damage of the surface, which effectively protects the cladding material of workpiece. Therefore, it is very suitable for workpieces, of which the surface of galvanized sheet, steel sheet coated with aluminum-zinc alloy etc. requires protection.

Adopt turbine vacuum absorption technology through which the workpiece is adsorbed securely during grinding and the bended and irregular workpieces may also be absorbed for grinding processing, greatly improving the processing scope and efficiency.

The complete machine adopts modular design, with characteristics of delicacy and fastness. Standard-configuration central control panel, with sample and convenient operation and available stepless regulation for processing speed.

Users can freely select abrasive material, with lower cost of abrasive consumables; the use-cost can be controlled freely.

  • Technical Parameters
  • Videos
  • Working Principles
  • Processing Case
    • Width of working table
      800mm
    • Maximum power
      23.5kw(free from dust collector)
    • Processing thickness
      0.5-120mm(thickness)
    • Rated voltage
      AC 380V/50Hz
    • Feeding speed
      1-3.8m/min
    • Rated current
      47A
    • Speed of brush
      8.5-20m/s
    • Weight
      2500KG
    • Overall dimension
      (2310mm length)*(1780mm width)*(1960mm high)

    The rolling brush conducts 360° grinding without dead angle for part contour through rotation and revolution so that the contour edge is smooth and even, the grinding amount is controllable and there is no trace generated on workpiece surface while the burr is removed.

    Since the equipment adopts vacuum absorption technology, the workpiece with small area may also be absorbed on conveyer belt very well for processing.

    It is suitable for processing of burr and sharp edge generated for cold processing such as NTC, mould stamping, cutting etc. 

    RS工件1.jpg RS工件2.jpg RS工件4.jpg RS工件4.jpg